OEM / ODM SOLUTIONS
High-Performance Audio Hardware Platforms.
Explore our 9 production-ready acoustic frameworks. Engineered with advanced ANC and custom driver arrays, ready for rapid ODM/OEM branding.
Inside Our Facility
Engineered in a Real Lab, Not a Rendering.
Every platform is validated in our acoustic lab using B&K 4128 systems and AP2722 analyzers. Batch consistency is tested, not assumed.
15
+Years Audio MFG
9
Active Platforms
0.3
%Batch Defect Rate
Watch Factory Tour
1:45 min · In-House Acoustic Lab
Production-Ready Platforms
9 Platforms. Infinite Configurations.
Browse by category — each platform is production-validated and ready for your brand tuning.
BT119 — Gaming Headset
Low-latency wireless gaming headset with 50mm drivers, detachable boom mic, and 3-in-1 connectivity (BT/USB/3.5mm).
50mm Driver3-in-1BT 5.3
Explore OEM Options 
BT118 — Entry ANC
Entry-level over-ear ANC headphone with 40mm dynamic drivers, 30hr battery life, and foldable travel design.
ANC -25dB30Hr BatteryFoldable
Explore OEM Options 
BTA127 — Value ANC
High-value hybrid ANC headphone with 40mm custom drivers, travel-ready build, and CE/FCC global compliance.
Hybrid ANCValue LineCE/FCC
Explore OEM Options 
G4 — Hi-Res ANC Flagship
Flagship platform with Hi-Res certification, -40dB Hybrid ANC, custom 40mm dynamic drivers. 0.3% batch defect rate.
Hi-Res AudioANC -40dBBT 5.4
Explore OEM Options 
GT26 — ANC TWS
Ultra-light 4.3g earbuds with Hybrid ANC (-35dB), 6-mic ENC, JL7016 BT 5.4 chipset, and Spatial Audio. Hall Switch pairing.
ANC -35dB6-Mic ENCSpatial Audio
Explore OEM Options 
GT98 — Pro TWS
Premium TWS with dual-driver hybrid architecture, LDAC support, multi-point connection, and wireless charging case.
LDACDual DriverQi Charging
Explore OEM Options 
GO01 — Open-Ear Sport
IPX5 water-resistant open-ear earbuds for sports and endurance. 8hr playtime, secure-fit ergonomics, ambient-aware design.
IPX5Open-Ear8Hr Play
Explore OEM Options 
1BA+1DD — Hybrid IEM
Dual-driver IEM with BA for mids/highs, DD for natural bass. Resin shell, 0.78mm 2-pin detachable cable. APAC bestseller.
1BA+1DD2-PinResin Shell
Explore OEM Options 
AE001 — Type-C ANC
Measured >25dB ANC, 12mm dual dynamic drivers, anti-interference mic in a metal shell. Type-C — zero latency, zero pairing.
ANC >25dB12mm DriverMetal Shell
Explore OEM Options Commercial Applications
Segmented by Commercial Application.
Aviation & Commute
Ultra-deep ANC for mission-critical noise isolation during travel and transit.
Sports & Endurance
IPX-rated water-resistant open-ear and secure-fit platforms for active lifestyles.
Esports & Gaming
3-in-1 low-latency wireless systems with detachable boom mics for competitive play.
Audiophile & Studio
High-fidelity multi-driver IEM architecture for critical listening and monitoring.
Technical Data Hub
Specifications at a Glance.
Acoustic Metrics
| Platform | Driver Config | ANC Depth | Freq. Response | THD | Chipset |
|---|---|---|---|---|---|
| ANC Headphone G4 | Custom 40mm Dynamic | -40dB | 20Hz - 40kHz | < 1% | BT 5.4 |
| TWS GT26 | 10mm Dynamic | -35dB | 20Hz - 20kHz | < 1% | JL7016 (BT 5.4) |
| Hybrid IEM 1BA+1DD | 1 BA + 1 Dynamic | Passive Isolation | 20Hz - 20kHz | < 0.5% | N/A (Wired) |
| Type-C ANC AE001 | 12mm x 2 Dynamic | >25dB | 20Hz - 20kHz | < 1% | AB136D |
Compliance Registry
| Platform | CE | FCC | RoHS | REACH | BSCI |
|---|---|---|---|---|---|
| ANC Headphone G4 | Certified | Certified | Certified | Certified | Audited |
| TWS GT26 | Certified | Certified | Certified | Certified | Audited |
| Hybrid IEM 1BA+1DD | Certified | N/A (Passive) | Certified | Certified | Audited |
| Type-C ANC AE001 | Certified | N/A (Wired) | Certified | Certified | Audited |
Packing Configurations
| Platform | Unit Weight | Master Carton | Units/Ctn | 20GP Qty | MOQ |
|---|---|---|---|---|---|
| ANC Headphone G4 | ~310g | 580x420x380mm | 20 | ~3,200 | Negotiable |
| TWS GT26 | ~41.2g | 420x320x280mm | 40 | ~8,000 | Negotiable |
| Hybrid IEM 1BA+1DD | ~32g | 380x280x240mm | 50 | ~12,000 | Negotiable |
| Type-C ANC AE001 | ~18g | 350x260x220mm | 100 | ~25,000 | Negotiable |
Knowledge Base
Sourcing & Engineering FAQs.
Can we customize the acoustic tuning curves on these platforms?
Yes. All platforms can be custom-tuned inside our acoustic labs using B&K 4128 systems to meet localized acoustic profiles (e.g., analytical or bass-focused) based on your target market. We support Reference Flat, Warm Vocal, V-Shape, and Bright Detail profiles.
What is the typical tooling and pilot-run timeline?
Modified samples require 3 weeks for EVT/DVT sign-off. Bulk production follows a strict 35-day timeline upon BOM finalization. Full ODM with custom tooling: 8-10 weeks from design freeze to first shipment.
What quality certifications do your products carry?
All platforms carry CE, FCC, RoHS, REACH as standard. Factory is BSCI-audited with ISO 9001. Every batch undergoes unit-level acoustic verification on B&K 4128 and AP2722 before shipment.
Do you support private label and full ODM/OEM?
Absolutely. Turn-key solutions: custom logo, colorways, packaging, multilingual voice prompts (EN/DE/JP/FR/ES/HI). Full ODM from industrial design to certification and logistics.
How do you verify batch-to-batch acoustic consistency?
Every unit undergoes individual acoustic measurement on B&K 4128 and AP2722 systems. Frequency response, THD, ANC depth, and sensitivity measured against spec. Batch reports available on request for B2B buyers.
